Home / Tamiya 1/10 TRF104 2WD Formula-1 Chassis Kit

Tamiya 1/10 TRF104 2WD Formula-1 Chassis Kit

Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Overview

    This hi-spec 2WD formula chassis, built around carbon fiber and aluminum chassis components, with the front lower arms crafted from carbon fiber plate, makes it a formidable opponent on the racetrack! Furthermore, the chassis features updated front and rear suspension, plus an updated R/C equipment layout which is compatible with Li-Po batteries.

    • Full Ball Bearings
    • Square-Shaped Battery Holder
    • Laid Down Steering Servo Position
    • Camber Angle Is Freely Adjustable
    • Caster Angle Is Also Adjustable

    Features

    • Features plastic upper A-arms
    • Camber angle is adjustable freely from +1 to -3 degrees (approximate) using a 2mm hex wrench
    • Caster angle is also adjustable at 6, 9 and 12 degrees
    • Ball connectors are equipped at motor mount front and rear, and suspension roll is placed at the center of the chassis
    • The model centering is controlled by roll springs under the rear shaft, and friction grease on roll dampers at motor mount allow adjustment of roll speed
    • The pitching is controlled by FRP suspension plate flex and a TRF damper
    • Battery pack, receiver and servo are positioned at the center of chassis to ensure better rear grip
    • A square-shaped battery holder is included, for Li-Po battery packs to comply with U.S. open-class regulations
    • 5 types of ground clearances are adjustable in 0.8mm steps and two wheelbases can be chosen with a difference of 2.5mm
    • The laid down steering servo is positioned about 30mm backwards compared to the TRF103 chassis and ensures a low center of gravity
    • Features a choice of 4 types of steering linkage adjustments over a range of about 1.8mm length by changing Ackerman plate position to keep direct steering
    • Lightweight and durable carbon fiber shaft limits weight and ensures compatibility with rubber tires which are relatively heavy
    • The rear wing is connected to the motor mount, and it moves along with rear suspension
    • 2.5mm thick carbon fiber front lower suspension arms have two attachment positions to adjust its width and attach wheels with different offsets

    Product Specs

    Ball Bearings
    Full Ball Bearings
    Battery
    Sold Separately
    Body
    Sold Separately
    Charger
    Sold Separately
    Chassis
    Carbon Fiber Chassis
    Completion Level
    Kit
    Differential
    Pressure Plate Ball Differential
    Drive Type
    Forward/Brake/Reverse
    Drivetrain
    2WD
    Gear Ratio
    Adjustable
    Ground Clearance
    Adjustable
    Manufacturer #
    42389
    Motor Size
    540
    Power Type
    Electric
    Product Height
    1.83" (46 mm)
    Product Length
    12.79" (325 mm)
    Product Width
    6.65" (169 mm)
    Radio
    Sold Separately
    Receiver
    Sold Separately
    Scale
    1/10
    Servos
    Sold Separately
    Shock Type
    Oil Shocks
    Speed Control
    Sold Separately
    Suspension
    CVA Oil Filled Rear Mono Shock/Coil Spring Front Suspension
    Vehicle Size
    Standard
    Vehicle Type
    On-Road
  • Customer Reviews
    No comments
BACK

You May Also Like

FMS Fox 2.3m V2 PNP
80% OFF

FMS Fox 2.3m V2 PNP

€ 44.00 € 220.00
Xuron Crafter's Shear
80% OFF

Xuron Crafter's Shear

€ 4.80 € 24.00